1.

Take the A10 autoroute south to ORLEANS

2.

Follow the A71/E9 autoroute south to VIERZON

3.

Connect to the A20 south (direction CHATEAUROUX , LIMOGES and BRIVE-LA-GAILLARDE or BRIVE )

4.

Take EXIT 54 (third one after BRIVE ) from the A20 , and follow the N140 direction MARTEL (about ten kilometers)

5.

In MARTEL , take the D803 direction ST. DENIS/MARTEL and VAYRAC

6.

After passing through VAYRAC , continue 3 kilometers to the town of BETAILLE , and continue straight, following signs to BRETENOUX

7.

When you reach the first roundabout in BRETENOUX , turn right over the bridge, and follows signs towards SAINT CERE (about four kilometers on the D940 )

8.

When you reach the roundabout at the top of the hill, take first exit on the right, direction PUYMULE and immediately take the small road to the left. THIOT INGENIERIE is in the first building on your right, about 300 meters from the roundabout.

9.

Take the A62 autoroute north (direction BORDEAUX , MONTAUBAN ) when leaving either the city or the TOULOUSE Airport ("Aeroport de Blagnac")

10.

VERY IMPORTANT: About 20 kilometers north of TOULOUSE , you will need to take the A20 autoroute (direction PARIS ). Be watching for the right hand exit and toll plaza, and do NOT continue toward BORDEAUX on the A62

11.

After paying the toll, continue following the A20 north, through the city of MONTAUBAN , following directions for the A20 autoroute, direction CAHORS and PARIS

12.

Approximately 20 kilometers after you pass the " CAHORS centre" Exit, you’ll see signs for EXIT 56 off the A20 autoroute, leading to GRAMAT , ST. CERE , FIGEAC , GOURDON

13.

Take EXIT 56 (at " Labastide Murat "). It should take 45 minutes to reach BRETENOUX from this autoroute exit

14.

After passing the toll booth, proceed through one roundabout, and at the next roundabout, follow directions for GRAMAT / SAINT CERE on the D807

15.

About 15 km later, after passing through GRAMAT , still following the D807 , you’ll reach the village of LAVERGNE . Continue along the D807 , and following signs for SAINT CERE and BRETENOUX

16.

When you reach the roundabout at the bottom of a long hill, after passing St Jean Lespinasse , you'll continue straight, following signs to BRETENOUX . There will be another roundabout; continue toward BRETENOUX along the D940

17.

When you reach the roundabout at the top of the hill, take the last exit direction PUYMULE and immediately take the small road to the left. THIOT INGENIERIE is in the first building on your right, about 300 meters from the roundabout